Large Direct-Pure EDI Lab Water Systems(mini)

The Large Direct-Pure EDI lab water system produces Type II water from tap water directly. Resistivity of product water is above 5 MΩ·cm (25 ℃) ,which meets or exceeds Type Ⅱ water quality standard defined by ASTM, CAP, CLSI and ISO 3696/BS 3997, the European and U.S. Pharmacopoeia. The System is designed for users who need 400 to 1800 liters of Type II water per day.
- The system incorporates the best in class Siemens EDI module to deliver high quality Type II water consistently at relatively lower cost.
- Automatic water quality control programs ensure EDI product water meeting or exceeding Type II water requirements.
- The fully automated control system contains pre-rinse, RO membrane fouling preventing flush, RO membrane life monitoring as well as many other programs for convenient operation.
- The pre-rinsing program starts automatically when a new RO membrane is installed so there is no need for users to set up additional cleaning procedures.
- RephiLe can provide full document support to meet users’ GMP, GLP, FDA and other certification requirements.
Main Applications:
- Type II Pure water can be used in many areas. Some of the typical applications are:
- Preparation of bio-reagents
- Preparation of culture media
- Preparation of solution for chemical analysis such as HPLC, ICP etc.
- For clinical analyzers
- Feed water for ultrapure water systems
- Medical device and equipment rinsing
- For serum and blood fractions
- For ophthalmics

 Feed Water Requirements 
 Tap water* Municipal water, TDS < 1000 ppm (2000 μS/cm)
 Operating Temperature 5~45 ℃
 Feed Water Pressure 30 - 90 psi (2 - 6 bar)
 Product Water Flow Rate Typically 30, 60 or 125 L/h (at 25 ℃)
 Product Water Quality 
 Resistivity > 5 MΩ·cm @ 25 ℃ (typically > 10 MΩ·cm @ 25 ℃)
 TOC < 30 ppb
 Particle (> 0.2 μm) < 1/ml (with a 0.2 μm final filter)
 Microorganisms < 0.1 cfu/ml (with a 0.2 μm final filter)
 Pyrogens (endotoxins) < 0.001 Eu/ml (with a terminal ultrafiltration cartridge)
 Length x Depth x Height 40.0 cm X 49.0 cm X 110.0 cm

*If water hardness is greater than 120 ppm, RephiLe suggests using an additional water softening device to protect the RO membrane in your system.

Ordering information:

 Description Catalog No.
 Direct-Pure Water System, EDI 30 RD0E0300E
 Direct-Pure Water System, EDI 60 RD0E0600E
 Direct-Pure Water System, EDI 125 RD0E01H0E
 Direct-Pure Water System, EDI 125 RD0E02H0E

Cartridge set is required for the water systems to function. Please contact RephiLe for detailed information.

 Copyright © 2007-2017 RephiLe Bioscience, Ltd. All Rights Reserved.